Install Guide – FXR-1 (Fox Float Rear Shocks)

Install Video

Coming soon — install video will be embedded here.

What's in the Box

• Tune Lever FXR-1
• Set screw
• 1.5mm allen key

Installation Steps

1. Use the included 1.5mm allen key to loosen the set screw on your stock Fox Float compression lever.
2. Slide the stock lever off the lever post.
3. Slide the Tune Lever FXR-1 onto the lever post in the same position.
4. Tighten the set screw snugly — don't overtighten.
5. Rotate the lever to your preferred position and confirm it moves freely through its full range.

Questions? Email hello@ridesaurus.com