Install Guide – FXR-1 (Fox Float Rear Shocks)

Install Video

What's in the Box

• Tune Lever FXR-1
• Set screw - 3mm x 0.5mm
• 1.5mm allen key

Installation Steps

1. Use the included 1.5mm allen key to loosen the set screw on your stock Fox Float compression lever.
2. Slide the stock lever off the lever post.
3. Slide the Tune Lever FXR-1 onto the lever post in the same position.
4. Tighten the set screw snugly — don't overtighten.
5. Rotate the lever to your preferred position and confirm it moves freely through its full range.
   
   Feel some slop? It's most likely your shock. You can verify by re-installing your OEM lever to check if it is present with it installed as well.

Questions? Email hello@ridesaurus.com